 |
特殊化學品事業部
|
A、Multifunctional
monomers
|
| Type |
Performance |
Suggested uses |
| 1. Monofunctional
monomers |
Features low viscosity,
good solvency, high reactivity, adhesion |
Screen ink, Adhesives,
Photopolymers, plastics, metal |
| 2. Difunctional monomers
|
Low volatility, high
reactivity, good flexibility, water soluble |
Inks, coatings, overprinting
varnishes, offset inks |
| 3. Trifunctional monomers
|
High cross-linking
density, fast cure response and solvency, good flexibility,
low skin irritation |
Coatings, adhesives,
inks, electronics, varnishes |
| 4. Tetra and Pentafunctional
monomers |
Fast cure response,
low skin irritation, high crosslinking density,
hardness |
Adhesives, Coatings,
Inks, Electronics, Sealers |
|
|
B、Acrylate-based
oligomers
|
| Type |
Performance
Features |
Suggested
uses |
|
1. Urethane acrylate oligomers |
Good
gloss retention, good elasticity, good weatherability
performance |
Printing
and varnishing for plasticized PVC, wood and PVC
floor-tiles, flexible coatings and inks for plastic
and metal |
| 2.
Epoxy acrylate oligomers |
Good
UV/EB cure reactivity, good hardness and chemical
resistance, provide improved flexiblility & toughness
without sacrificing sure speed |
Overprint
varnish, clear coating for paper, wood and metal |
|
3. Polyester acrylate oligomers |
Good
pigment wetting, low skin irritation, Good adhesion,
Hardness, Abrasion resistance |
Overprint
varnish, clear coating for paper, wood and metal
Coatings, metals, plastics, Lithographic & screen
ink vehicles |
|
4. Specific functional acrylates |
Acrylate
functionality, carboxylic acid, methacrylate functionality
|
UV
curable etching resist, UV curable plating resist
|
|
|
C、Reactive
amine synergists
|
| Type |
Performance
Features |
Suggested
uses |
| Reactive
amine synergists |
On
migration after UV cure, high speed of surface cure
|
Adhesion
promoter for PVC plastic UV clear coating, in place
of non-reactive amine synergists, paper coating |
|
|
D、Photoinitiators
|
| Type |
Performance
Features |
Suggested
uses |
| Photoinitiators |
Optimum
absorption at 250-350nm, fast surface cure |
Clear
varnishes for paper, wood, metals and plastics,
electronic photoresists, unsaturated. Polyester/styrene |
|
|
E、Primers
and Topcoats for Vacuum Metalization of plastic substrates
|
| Type |
Performance
Features |
Suggested
uses |
| 1.
Thermal primers |
Fast
dry, Good adhesion to metal layer |
Spraying
and dipping primer for vacuum metallization of PP,
PS and ABS etc.., hot stamping |
| 2.
Thermal topcoat |
Fast
dry, Good hardness and abrasion resistance, solvent
and water resistance |
Spraying
topcoats for PS, ABS, PET, OPP, PVC film etc. |
|
|
F、UV-Cured
Ink
|
| Type
|
Performance
Features |
Suggested
uses |
| 1. UV-cured
etch resist |
Fast cure,
Easily remove, High resolution, Excellent acid resistance
|
Etch resist
for pattern formation |
| 2. UV-cured
solder mask |
Excellent
adhesion, heat resistance, chemical resistance,
and electric insulation resistance |
Solder
resist for hot air leveller of printed circuit boards |
| 3. Light-Alkai
developable Liquid Photoimagable Solder Mask |
Easy developping,
Excellent printability, Excellent sharp resolution,
electric insulation, heat resistance, chemical resistance,
and excellent property in gold plating |
LPSM |
| 4. UV-cured
marking Ink |
Excellent
adhesion, heat resistance, electric insulation resistance,
and chemical resistance |
Marking
ink for various types of printed circuit boards |
|
UV固化塗料應用指南
長興SM中文目錄
| *以上數據係一表列試驗方法測得，非限定之規格，僅供選擇適用品之參考，若特殊用途，請先試驗或洽詢本公司。 |
|
|
|
|
